Buying an Ultralight Aircraft - Tips and Pitfalls to Avoid
Who doesn't want to fly right? With all the advantages, looking for an ultralight aircraft for sale may be a great experience or a terrible one depending on how you approach it. Knowing what you're getting into ahead of time can, at a minimum, save you some hassle, and in the long run save you time money, heartache (and possibly bodily injury).
So what is it about ultralights that seems so appealing. One of the more attractive things about them has to do with their almost non-existent barrier to entry. For instance, training can be completed in a couple of days, and in actuality, you don't need a license to fly them at all. It's not as easy as jumping in the seat and starting the engine; You should still take some lessons. Another plus is that with many of them, you can fold them up and put them in the back of your SUV, or truck, and take them anywhere. Finally, there are lots of enthusiasts to help you get the hang of reassembling and flying your ultralight.
So what exactly IS an ultralight aircraft? Ultralights are not allowed to carry more than one person or five gallons of gas. The maximum weight for the ultralight is 254 pounds. Ultralights are not allowed to go faster than 55 knots. It has a top stall speed of 24 knots. You have to fly during daylight hours and you can only fly over uninhabited areas. Finally, you have a few styles of ultralights to choose from, including weight-shift control trikes, powered parachutes, and powered paragliding.
A few things to look for when buying:
-It must only have one seat.
-Castle nuts and pins should be used to prevent vibration wear.
-Make sure the rudder and pedal mechanism is well-built and the aircraft is rust-free.
-There shouldn't be any loose parts of cables near the propeller.
-The aircraft ought to be able to fly straight without your help. It should be able to fly straight without constant pressure on the ailerons.
-How strong is the ultralight? How has it held up under the wear and tear of constant landing.
-Has it had any repair work, and what kind of regular maintenance will you need to do? Did the aircraft ever have something other than a perfect landing?
-Make sure the ultralight has no structural problems like frame cracks or dents.
-Try to inspect the craft in person. Pay special attention to the ailerons: Pay particular attention to the design of the ailerons, it should be simple to prevent any problems.
Showing posts with label Avoid. Show all posts
Showing posts with label Avoid. Show all posts
Wednesday, April 11, 2012
Saturday, March 24, 2012
Stealth Fighter Radar - How to Avoid Compromising a Fighter's Position
Stealth Fighter Radar - How to Avoid Compromising a Fighter's Position
To begin with things very clear, fighter radars are not only what the main people think they are. Supposedly, just a way to detect enemy aircraft. That's not a bad understanding, but it needs to be complemented saying that if you detect an enemy aircraft with your fighter radar, the enemy aircraft will automatically detect you.
A fighter radar is just some waves sent in the air. This waves get reflected on an object like a plane, and come back to your plane where they are detected by sensors and analyzed to determine position, speed, direction of flight, and even kind of aircraft located. As an aircraft needs to have sensors to detect its own reflected waves, it also will detect any ways that are sent to it. This is the reason why when sending waves to detect an aircraft will automatically reveal our position.
This has even another problem. A fighter radar has a certain range of detection. This is the distance in which the waves can travel in one way, get reflected, and come back with the strength enough as to provide a signal in the pilot's screen. In this way, we can say that the aircraft that a radar can effectively detect can be placed up to 100 miles, to set an example. But the problem is that all other aircraft placed between 100 miles and 200 miles will be alerted of our presence, but we will never know about their presence.
All this reasoning brings to a conclusion. There is a need to take advantage of this situation, and this is how the active and passive fighter radars were created. An active fighter radar is the one that actively sends waves in order to detect anything placed within its effective range. A passive fighter radar is a listening one. It simply waits to receive waves from all the airplanes around that are using their active radars. This combined with a strong stealth condition can guide an aircraft to his enemy without even being detected.
Unfortunately, not in all combat situation this is a possibility. Normally the strategy involves to use the passive radar to approach targets, but when it is time to engage and fire, the active fighter radar sometimes must be switched on in order to allow the missile to get the information and follow it. Some missiles need the guidance of the airplane's radar until they hit the target, which compromises heavily the aircraft's position. Recently, many missiles have been developed in which you simply can fire and forget. Switch for a few seconds to active radar, pass the information to the missile, fire and switch off the active radar.
Combining this methodology with a change of direction, speed and altitude just after the launch of the missile gives always the less compromise to the position of the plane. In any case, compromising the position of the plane for a few seconds is always necessary when firing, as it involves a extreme heat that infrared detectors can locate, and with stealth fighters like the F22 Stealth Fighter, it involves the opening of doors that get the Radar Cross Section extremely enlarged.
To begin with things very clear, fighter radars are not only what the main people think they are. Supposedly, just a way to detect enemy aircraft. That's not a bad understanding, but it needs to be complemented saying that if you detect an enemy aircraft with your fighter radar, the enemy aircraft will automatically detect you.
A fighter radar is just some waves sent in the air. This waves get reflected on an object like a plane, and come back to your plane where they are detected by sensors and analyzed to determine position, speed, direction of flight, and even kind of aircraft located. As an aircraft needs to have sensors to detect its own reflected waves, it also will detect any ways that are sent to it. This is the reason why when sending waves to detect an aircraft will automatically reveal our position.
This has even another problem. A fighter radar has a certain range of detection. This is the distance in which the waves can travel in one way, get reflected, and come back with the strength enough as to provide a signal in the pilot's screen. In this way, we can say that the aircraft that a radar can effectively detect can be placed up to 100 miles, to set an example. But the problem is that all other aircraft placed between 100 miles and 200 miles will be alerted of our presence, but we will never know about their presence.
All this reasoning brings to a conclusion. There is a need to take advantage of this situation, and this is how the active and passive fighter radars were created. An active fighter radar is the one that actively sends waves in order to detect anything placed within its effective range. A passive fighter radar is a listening one. It simply waits to receive waves from all the airplanes around that are using their active radars. This combined with a strong stealth condition can guide an aircraft to his enemy without even being detected.
Unfortunately, not in all combat situation this is a possibility. Normally the strategy involves to use the passive radar to approach targets, but when it is time to engage and fire, the active fighter radar sometimes must be switched on in order to allow the missile to get the information and follow it. Some missiles need the guidance of the airplane's radar until they hit the target, which compromises heavily the aircraft's position. Recently, many missiles have been developed in which you simply can fire and forget. Switch for a few seconds to active radar, pass the information to the missile, fire and switch off the active radar.
Combining this methodology with a change of direction, speed and altitude just after the launch of the missile gives always the less compromise to the position of the plane. In any case, compromising the position of the plane for a few seconds is always necessary when firing, as it involves a extreme heat that infrared detectors can locate, and with stealth fighters like the F22 Stealth Fighter, it involves the opening of doors that get the Radar Cross Section extremely enlarged.
Subscribe to:
Posts (Atom)